التقييم التجريبي لتأثير تدرج الركام الخشن على خواص الخرسانة النفاذة في ليبيا
Experimental evaluation of the effect of coarse aggregate gradation on the properties of permeable concrete in Libya
إبراهيم خالد، إبراهيم خالد، معمر الغويل، عبد المنعم السوقي
DOI: https://doi.org/10.64489/0tt72j42
الملخص
المخلص الخرسانة النفاذة هي نوع خاص من الخرسانة مصممة لتحقيق خصائص تدفق المياه والتهوية بشكل أفضل مقارنة بالخرسانة التقليدية. تستخدم هذه الخرسانة بشكل واسع في مجالات متعددة، مثل إدارة مياه الأمطار وتخفيف آثار الفيضانات. في هذا البحث، تم إنتاج الخرسانة النفاذة بدون مواد ناعمة احتوت العينات على ركام بتدرجات مختلفة تحمل علامات A, B, C, D, E مع معامل النعومة بلغ %3.21% وتم اختبارها من أجل قوة الضغط والكثافة ومعدل التسرب والمسامية. بينت النتائج أنه تم الحصول على أفضل خليط من الخرسانة النفاذة باستخدام التدرج الكلي للمجموعة E لوحظ وجود علاقة جيدة بين التدرج الكلي وقوة الضغط والكثافة ومعدل التسرب والمسامية كما هو موضح في البحث. لقد كان متوسط قوة الضغط عند 28 يوماً لهذه الخرسانة النفاذة هو 201 ، وكانت الكثافة التي تم الحصول عليها لتدرج المجموعة kg/m E 1912 مع معدل تسرب mm/hr 36474 ومسامية بنسبة 18.43. تبرز أهمية هذا البحث في كون ليبيا مطلة على البحر الأبيض المتوسط وهي من الدول المعرضة للفيضانات في بعض مناطقها.
Abstract
Abstract: Pervious concrete is a special type of concrete designed to achieve better water flow and ventilation properties compared to traditional concrete. This concrete is widely used in various fields, such as storm water management and flood mitigation. In this research, permeable concrete was produced without fine materials. The samples contained aggregates of different gradations marked A, B, C, D and E with a fineness modulus of 3.21%. They were tested for compressive strength, density, infiltration rate, and porosity. The results indicated that the best mix of permeable concrete was obtained using the aggregate gradation from group E. A good relationship was observed between the aggregate gradation and compressive strength, density, infiltration rate, and porosity, as shown in the research. The average compressive strength at 28 days for the pervious concrete was 12.01 Mpa, and the density obtained for the gradation of group E was 1912 kg/m³, with an infiltration rate of 36474 mm/hr and a porosity of 18.43%. Libya, located on the Mediterranean Sea, is a country susceptible to flooding in certain areas, highlighting the importance of this research.
العودة إلى موقع المجلة ←